iSCSI Archive

  • Using the DroboPro with VMware ESX and ESXi

    Using the DroboPro with VMware ESX and ESXi

    Regardless of the fact that I am a fan of engineering my own products, such as the OpenSolaris iSCSI custom SAN, I have always been attracted to the Data Robotics product line, the Drobo. I am not much of a Apple fan either, however, similar...

    Full Story

  • OpenSolaris iSCSI Initiator

    OpenSolaris iSCSI Initiator

    As part of my testing phase during the custom SAN project, I was running into performance issues with the Microsoft iSCSI Software Initiator and the OpenSolaris COMSTAR iSCSI target. Although some individuals were running into significant performance issues, such as 600KB/sec writes, my problem was...

    Full Story

  • OpenSolaris iSCSI Target

    OpenSolaris iSCSI Target

    After spending a good amount of time on the iSCSI Enterprise Target (IET) solution and running into compatibility issues with VMware ESX 3.5 and 4.0, I decided to move on to other solutions. After reading up on the ZFS file system and how the features...

    Full Story

  • Custom iSCSI (IET) with VMware ESX

    Custom iSCSI (IET) with VMware ESX

    As mentioned in my articles on building a custom server case and the iSCSI Enterprise Target on RedHat Enterprise Linux 5.3, sometimes there is the need to facilitate stiff project requirements while spending nearly nothing. In a booming economy, it is unlikely that you would...

    Full Story

  • Custom Storage Server (SuperMicro 3U Case)

    Custom Storage Server (SuperMicro 3U Case)

    As with my articles that involve the iSCSI Enterprise Target (IET), the project that drove the desire to attempt a custom storage server was a backup to disk solution. The requirements were cost, space and speed. For the most part, using the case as described...

    Full Story

  • Compile and Install iSCSI Enterprise Target (IET) on RedHat Enterprise Linux (RHEL) 5.3

    Compile and Install iSCSI Enterprise Target (IET) on RedHat Enterprise Linux (RHEL) 5.3

    In this article, I am going to share what I learned while working with the IET on RHEL. Because I am fairly stubborn, I persisted that I use the latest IET, which at the time was 0.4.17. The unfortunate part was that I could not...

    Full Story